Back to Main Catalog Index
OEM / Reproduction Fuel Petcocks
OEM / Reproduction Fuel Petcocks
................
 |
This new Kawasaki OEM
fuel petcock is stock equipment for the 1977 and
1978 Kawasaki KZ1000A models (except A2A / vaccuum operated)....Has
2 spigots oriented right.....
Although not the exact original petcock, this item is also ideal for use on all the 1976 through 1980 900 & 1000 models (using the spigot-type petcock mount), and will solve the problem of the rear fitting slipping out of the petcock on the LTD's (which is a potentially dangerous situation!!) $159.95 NLA See Item Below: |
Aftermarket (Made in Japan/ OEM
quality) reproduction of the OEM petcock above -
Uses the same seals as the Kawasaki
OEM petcock ....
............ $129.95
These are not the junk
sold on misc. internet sites for $14.95 >
.......Which have flow
issues - Such as they often don't flow in the "ON" position !
Contact us by e-mail at
> jim@redlinecycle.com
.................. |
.............. |
...... |
Want to get rid of your vaccuum fuel petcock?
Convert your 2-bolt mount
tank to a single 22mm threaded spigot mount >
The
quick & easy way -
Allows for the switch to an "ON-OFF-RESERVE" OEM repro or Pingel Fuel Valve -
Super-high quality adapter includes bolts, seal washers, and a gasket.
Holes spaced at 44mm as
on all 1978 thru 1983
Kaw vaccuum petcock applications.
In Stock at Redline Cycle $69.95
''''''''''''''''''''''''''''..................' |
OEM-quality reproduction vaccuum-type fuel petcock (Made in Japan) as used on 1978 KZ1000A2A models, and 1979 and 1980 KZ1000 models with the 2-bolt mount..... (other than the KZ1000B / LTD) High-quality unit not prone to
leaks like the original....
Mounts directly with no mods...... $199.95 This model has one outlet - Models with using a dual-inlet
set of carbs will require a "T" fitting......
Included
|
Fuel Line / Vent Line / Overflow Line
,  |
The best stuff.....Ultra-high quality line for multiple
applications:
Bottom: 1/4"
ID fuel line is ultra-high quality, very
Center: 3/16" ID carb vent line $15.49 / 3 foot pkg. Top: Carb
overflow line: Stronger and more durable than
|
,  |
Small 8mm clips for the overflow lines are not necessary
with the high-quality line that we use, but they add that original touch - $1.19 ea. / $4.00 set of 4 In Stock at Redline Cycle |
 |
High quality
OEM "T" fitting converts any single outlet petcock to
a dual outlet petcock........Gives a permanent seal with the proper fuel
line......Will work with 1/4 or4 5/16 I.D. line....
In Stock at Redline Cycle...... $8.99 each |
e-mail us at > jim@redlinecycle.com