Any item shipped U.S. Mail / UPS to anywhere in the world
Handle Levers & Parts / Z-1 Clutch Lever Perch / Pivot Bolts
Handle Levers & Parts / Z-1 Clutch Lever Perch / Pivot Bolts
 |
For 1973 - 1977 Z-1 & KZ900
models ........Front brake levers...
The OEM front brake lever for the 900's is no longer available, but no big loss as it was outrageously expensive at $45! ....... We have good qualtiy reproductions for ..... $17.95 each In Stock at Redline Cycle |
 |
Kawasaki OEM Levers
and parts............
Left: Kawasaki
OEM Clutch lever fits all
1976 and later 900 & 1000 models...
Center: Kawasaki
OEM Clutch cable adjuster nut / bolt....For
all 1976 and later 900 & 1000 models....
Right: Kawasaki
OEM front brake levers for
all
1978 thru 1980 1000 models (with 8mm pivot bolt)
|
 |
Front brake lever pivot bolts - 7mm / 8mm shank....
The 7mm shank pivot bolts as used on all
1973 thru 1977 900 models are available
Kawasaki
OEM
/ NOS...
Repro 8mm shank bolts as used on most 1978 thru 1980 1000 models are available repro for $7.99 Drilling the upper hole on your master cylinder, and the hole in your lever to 5/16" allows the use of the beefier, less expensive repro bolt....... It takes 30 seconds to do... In Stock at Redline Cycle |
 |
Kawasaki OEM clutch
lever / adjuster nut / lever pivot bolt for
the Z-1 models.......
The clutch cable adjuster nut for the Z-1's has a smaller diameter that the 76 & later type.....The adjuster screws are interchangeable with the later models.... Z-1 clutch levcr pivot bolt is unique to these models.... Z-1
Clutch lever $15.95
In Stock at Redline Cycle |
 |
Kawasaki OEM NOS
clutch lever bracket for all 1973 thru 1975 Z-1
models......
Limited Availability $24.95 each |
Redline Cycle Service, Inc.
Skokie, IL, USA
Since 1976
Phone: (847)675-2020 Fax: (847)675-2027
Toll Free: (877)271-9292